currency_exchange30-Day Money-Back GuaranteesettingsFits Straight-Shaft TrimmerslockSecure Checkout
TitanEdge Steel Wire Brush Cutter Head

whatshotBest Seller

TitanEdge Steel Wire Brush Cutter Head

$68.99Mounting kit included

Trade weak nylon string for twisted high-carbon steel wire.

check_circleTwisted high-carbon steel wire cuts thick weeds & grass
check_circle2-in-1: also deburrs and removes rust, paint & oxide
check_circleNo rope to replace — simple bolt-on install
check_circleFits most straight-shaft trimmers & brush cutters
1
lockSecure SSL checkoutbuildMounting kit includedcurrency_exchange30-Day Money-Back Guarantee
VISAMASTERCARDAMEXPAYPALG PAY
2-in-1
Cuts grass & removes rust
No rope
No line to ever replace
25mm
Universal 1" mount fit

The string-head struggle

Still Fighting Thick Weeds With Weak String Heads?

closeTraditional String Heads
cancelSnap and shred within minutes of real work
cancelBog down on anything thicker than grass
cancelBurn through spools every single weekend
cancelCan only ever do one job — trimming
checkTitanEdge Cutter Head
check_circleTwisted steel wire shrugs off thick, matted growth
check_circleFlexible strands keep cutting where string melts
check_circleOne head lasts seasons — with no rope to replace
check_circle2-in-1: also deburrs and strips rust off metal

Built to outwork the yard

Engineered For The Jobs String Can't Handle

grass

Twisted Steel Wire

High-quality twisted steel wire wound onto a rigid steel rim for consistent, flexible bite that won't snap or melt.

bolt

Faster Cutting Performance

The dense wire brush clears thick weeds and matted grass in fewer passes, so you finish the yard in a fraction of the time.

cleaning_services

2-in-1 Cut & Clean

Doubles as a polishing and cleaning accessory — ideal for deburring, rust, dust and oxide removal on metal.

all_inclusive

No Rope, Long Life

No nylon line to feed or replace. Bolt the head on once and the steel wire keeps going season after season.

Twisted Steel Wire
FEATURE 01

Twisted Steel Wire

Built from twist-wound steel wire on a rigid steel rim. The twist gives each strand consistent performance and just enough flex to keep biting where nylon string would snap.

check_circleTwist-wound steel wire
check_circleRigid steel rim
Cut Weeds, Then Strip Rust
FEATURE 02

Cut Weeds, Then Strip Rust

One tool, two jobs. When the yard's done, the same head works as a cleaning and polishing accessory — deburring, rust, dust and oxide removal on metal and stone.

check_circleDeburr & polish metal
check_circleStrip rust, paint & oxide
No Rope To Change — Just Install
FEATURE 03

No Rope To Change — Just Install

Forget feeding line. Seat the brush on the top bolt of your straight-shaft trimmer, drop on the thrust washer and rider plate, then lock it with the collar nut. The screwdriver's included.

check_circleMounts on the top bolt
check_circleWasher, plate & nut included
Fits Straight-Shaft Trimmers
FEATURE 04

Fits Straight-Shaft Trimmers

A 25mm (1") mounting hole fits almost all brush cutters and most straight-shaft trimmer models — odds are it already fits the one in your shed.

check_circle25mm / 1" mounting hole
check_circleStraight-shaft trimmers & cutters

One pass. Real results.

From Overgrown To Immaculate

BEFOREBefore
AFTERAfter

A chest-high patch of matted weeds and tough grass, cleared in one pass — no restringing, no bogging down, no second trip to the shed.

Up and running in 60 seconds

Three Steps To A Tougher Trimmer

1 do_not_disturb_on

Remove your old head

Take the existing string head off your straight-shaft trimmer to expose the top bolt.

2 cached

Bolt on the brush head

Seat the brush on the bolt, add the thrust washer and rider plate, then lock it with the collar nut.

3 grass

Start cutting

Squeeze the throttle and walk into the worst of it. No rope to feed, ever again.

The fine print

Product Specifications

diamondMaterial addremove
High-quality twisted steel wire wound onto a rigid steel rim. The round, twist-wired brush delivers consistent, flexible cutting performance.
adjustMounting Hole addremove
25 mm (1 inch) center hole. Seats on the top bolt of a straight-shaft trimmer and locks down with the included hardware.
settingsCompatibility addremove
Fits almost all brush cutters and most straight-shaft trimmer models. No rope to change — it bolts straight on.
inventory_2Package Contents addremove
1× Steel Wire Brush Cutter Head, 1× Thrust Washer, 1× Rider Plate, 1× Collar Nut and 1× Screwdriver.
shield

Built To Outlast The Yard

Where nylon string snaps and melts, twisted high-carbon steel wire keeps cutting. Each strand is wound onto a rigid steel rim for consistent, flexible bite that powers through dense growth — then flips to deburring, rust and oxide removal when the yard's done. No spools to burn through, no weekend lost to restringing.

diamondTwisted steel wireall_inclusiveMulti-season service lifeforumReal human support

Good questions

Frequently Asked Questions

Will it fit my trimmer? addremove
Almost certainly. The 25mm (1") center hole seats on the top bolt of straight-shaft trimmers and fits almost all brush cutters and most trimmer models — odds are it already fits the one in your shed.
How long does it last? addremove
Because there's no nylon line to wear out, the twisted steel-wire brush typically lasts multiple seasons of regular use — with no spools or rope to keep buying.
Is installation difficult? addremove
Not at all, and there's no rope to change. Remove your old head, seat the brush on the top bolt, add the thrust washer and rider plate, then tighten the collar nut. The screwdriver is included.
Can it cut thick weeds and grass? addremove
Yes — that's exactly what it's built for. The twisted steel wire powers through dense weeds and matted grass that bog down or melt ordinary string heads.
Can I use it to remove rust? addremove
Absolutely. The head doubles as a cleaning and polishing accessory — well suited to deburring, rust, dust and oxide removal on metal, iron board and stone.
What comes in the box? addremove
Every order includes 1× Steel Wire Brush Cutter Head, 1× Thrust Washer, 1× Rider Plate, 1× Collar Nut and 1× Screwdriver — everything you need to mount it and start cutting.
TitanEdge Steel Wire Brush Cutter Head

Upgrade Your Trimmer Today

Retire your weak string head for good and let twisted steel wire do the work. Stock is limited and selling fast.

$68.99Mounting kit included
currency_exchange30-Day Money-Back GuaranteesettingsFits straight-shaft trimmerslockSecure checkout
$68.99 Twisted steel wire · In stock
check_circle